Foaming soap dispenser secured with 5/16 bronze eyes and bungee cord. We refill the dispenser with dish soap. 1/3 soap 2/3 water. With it right over the sink it is really easy to wash your hands or dispense soap
Olive oil and other condiment bottles secured with 5/16 bronze eyes and bungee.
Here is a link to the bronze pad eyes I used.
Sea Dog Pad Eye Bronze 5/16In
Link to misc bronze hardware
Misc Bronze Hardware
Pump pot hanging from stainless hook for hot water
This Pump pot is great. It will keep water hot for 5 or 6 hours and even 9 hours later will be hot enough to hurt your hands if used as dish water. We keep hot water in it all day every day for cups of coffee, hot chocolate, instant cider, chai or tea. It took us a while to find the right pump pot. They are not all made equal. Of 4 or 5 we had tried this specific pot has worked the best for how long it will keep water hot.
BUNN 32125.0000 2.5 Liter Lever-Action Airpot, Stainless Steel
Microwave platform that can rotate into the salon or galley. Secured with Bungee and bronze hardware while underway. I had a friend with a microwave holder that pivoted back and forth between the galley and the salon that I loved. His was beautifully handcrafted out of wood. Alas I don’t have his level of wood craft nor the patience to take that long on such a minor project compared to much of what needs doing on the boat. So drawing on my minor welding skills I purchased stainless tubes, angle and rod and welded it up.
Here are some links to the raw materials I used in construction of it.
304 Stainless Steel Angle, Unpolished (Mill) Finish, Annealed, Standard Tolerance, Inch, ASTM A276, Equal Leg Length, Rounded Corners
304 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, Standard Tolerance, Inch, AMS 5639/ASTM A276/AMS QQ-S 763/ASTM A276
Stainless Steel 304 Seamless Round Tubing
Welding Electrode Stainless Steel Rod, 1 Lb
304 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, Standard Tolerance, Inch, AMS 5639/ASTM A276/AMS QQ-S 763/ASTM A276
This is the welder I am using now for these projects. It is about the size of a loaf of bread and runs on 110. Good for small projects.. Chicago Electric Inverter Arc Welder
If I were to do it again I would probably buy this one even though it is a bit bigger as they say it can use 120 or 240 volts. Mine maxes out at 80 amps welding current where this one is 120 amps when on 240 volt.
EVERLAST PowerARC 140 140amp Lift Start TIG / Stick IGBT Welder Dual Voltage
Recent Comments