Log In
Register
Home
Topic RSS
Offline
Have recently repaired leaky fuel tank. Was a hundred hour job that stretched over 2 years. Cost was $150 to weld a new bottom onto the tank. My tank is Y shaped and I had to cut 8 inches off the bottom portion in order to get the tank out of the boat. I also had to remove the teak trim on the sides of the main hatch to get the tank out of the boat. The tank itself is just placed into the hull and then glassed in on the top, so it is easy to cut the tank out.
By keeping the tank dry and free from stray electric current, the aluminum was in good shape and a replacement was not needed. Lost 8 gallons of capacity so now we hold ONLY 75 gallons. Have many pictures but can't figure out how to get them from PICASA to this web site.
Cheers and beers,
Jim
Offline
Jim:
What year is your boat? Mine is a 79 and we have stainless tanks. The PO was so cheap I would not think he would have upgraded to SS if it was aluminum originally.
Rick
Offline
Rick,
My fuel tank is aluminum. The water tanks are stainless. I am under the impression that diesel is not compatible with stainless. My boat was built in 1975. A good honest boat that served us well.
Cheers , Jim
Most Users Ever Online: 120
Currently Online:
6 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Jonathan Oasis: 174
bobmcd625: 165
CAE: 150
mgav451: 143
Rick: 94
svbodhran: 84
Member Stats:
Guest Posters: 7
Members: 366
Moderators: 1
Admins: 1
Forum Stats:
Groups: 3
Forums: 13
Topics: 745
Posts: 3834
Newest Members:
tonyflor, sailordad46, Spirare, BradHartliep, Duncan, MistyDawnModerators: Patrick Twohig: 134
Administrators: Scott Carle: 1480
