http://downeasteryachts.com/forums/general-forum/raymarine-ev-200-sail-autopilot-tiller-arm Simple:Press Version 5.6.7 http://downeasteryachts.com/forums/general-forum/raymarine-ev-200-sail-autopilot-tiller-arm#p4001 General Forum http://downeasteryachts.com/forums/general-forum/raymarine-ev-200-sail-autopilot-tiller-arm#p4001 So the rudder shaft on my de 32 diameter is 1.85 inches seems to be hollow stainless. I orderd a buckbalgonquin split head tiller arm that is 1.75 shaft diameter and had a machine shop bore it out and add 2 set screws. The split head is necessary if you dont want to take the shaft out. Its about 400$ solid bronze 15" long it needs to be cut to 10 and a .5" pin hole added to the end. I plan on mounting the ev200 mechanical drive behind the quarter birth bulk head. Il post updates

]]> Sun, 30 Jan 2022 10:57:46 -0500 http://downeasteryachts.com/forums/general-forum/raymarine-ev-200-sail-autopilot-tiller-arm#p3988 General Forum http://downeasteryachts.com/forums/general-forum/raymarine-ev-200-sail-autopilot-tiller-arm#p3988 Hello again. Looking to add a raymarine ev 200 autopilot.  Does any one have one? Handle a de 32 well and how did you  fab up a tiller arm to connect the drive unit?

]]> Fri, 16 Oct 1925 04:06:31 -0500